In music studios every square centimetre is worth its weight in gold. Our in-house developed ‘KBS-T’ fits perfectly onto the side posts of a Jasper keyboard stand (diameter 36 mm / 1,42 inch) and creates extra space for a Volca, a Nord Drum, Synth Controller or other small gear. Installation: remove the blind plug from the stand’s post and attach this shelf in its place.
The plug connects the shelf board via a ball joint, allowing you to adjust its alignment and angle as required. The ball is attached to the base with an M6 Allen screw, so you don’t need to worry about the ball joint breaking off. The ball joint is tightened by hand using a large nut. The stability of the joint depends on the torque of the nut, so tighten it properly to ensure the shelf does not tip over under load. The shelf’s maximum load capacity is approximately 2 kg.
The shelf is made of sanded, unfinished 10 mm MDF (medium-density fibreboard) and measures 22 x 16.5 cm. It is already attached to the base of the stand using three wood screws. Available in three colours: black, white or peach.
The KBS-T is an accessory for keyboard stands manufactured by JASPERS Alu-Systeme GmbH. Stereoping has no connection with or affiliation to JASPERS Alu-Systeme GmbH. We accept no liability for personal injury or damage to property arising from the use of the KBS keyboard stand shelf.
Article number: 2300
Manufacturer: Gregor Zoll Musikelektronik, Hermann-Voss-Str. 21, 49872 Meschede Deutschland, Email: shop@stereoping.com
